data brief for further information contact your local stmicroelectronics sales office. november 2011 doc id 11694 rev 2 1/3 3 ST7MDT20-T80/dvp tqfp80 (14x14) connection kit for st7mdt20-dvp3 features tqfp80/64/44 adapter (db530) : allows the connection of your st7mdt20-dvp3 emulator to your application board in place of your st7. tqfp80 (14x14) device adapter (db531) : adapts the emulator connection to the package of your st7. yamaichi tqfp80 socket (ic149-080-051- s5) : solders to your application board to allow connection of the emulator or installation of your st7. additional 50-pin flat cable for connection between emulator and the adapter. description the tqfp80 (14x14) connection kit (st7mdt20- t80/dvp) provides the hardware you need to connect your st7mdt20-dvp3 emulator to your application when debugging applications for st7 microcontrollers in the tqfp80 (14x14) package. figure 1. flat cable and adapter figure 2. tqfp80 device adapter (db531) figure 3. connection to application board 4 1 & 0 ! d a p t e r $ " ! d d i t i o n a l
p i n f l a t c a b l e - 3 6 - 3 6 3 o l d e r s o c k e t t o a p p l i c a t i o n b o a r d ! l i g n p i n i n d i c a t o r s t h e n s e c u r e t h e d e v i c e a d a p t e r t o t h e s o c k e t 0 l u g f l a t c a b l e s i n t o t h e c o r r e s p o n d i n g c o n n e c t o r s * a n d * o n t h e a d a p t e r 0 l u g t h e 7 a n d 7 c o n n e c t o r s o n t h e a d a p t e r i n t o t h e c o r r e s p o n d i n g c o n n e c t o r s o n t h e d e v i c e a d a p t e r 0 i n ) n d i c a t o r s / r i e n t a t i o n ) n d i c a t o r s - 3 6 www.st.com
for more information ... st7mdt25-t64/dvp 2/3 doc id 11694 rev 2 1 for more information ... st7-dvp3 user manual: information common to all dvp3 series emulators st7mdt20-dvp3 probe user guide: information specific to st7mdt20-dvp3 2 revision history table 1. document revision history date revision changes 10-oct-2005 1 initial release. 28-nov-2011 2 document formatting update
st7mdt25-t64/dvp doc id 11694 rev 2 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
